|Now you can easily protect your Hummers paint finish and interior with our custom Hummer Car Cover. Three levels to offer you the protection you demand. Each Hummer Cover is custom made and can be designed to accommodate a spare tire and or roof rack. They are also available for all Hummer models.
200 Series – 200 Series fabric to be a mid-price leader in quality and performance. It uses 3-layer polypropylene construction for moisture and dust resistance, and the fibers are treated for extra UV resistance. If you are looking for an inexpensive cover for indoor storage and limited outdoor use, this U.S. made fabric offers good, basic protection and is an excellent value. Designed for indoor or light outdoor use.
380 Series – The 3-layer cover is designed for cost effective performance. The top layer resists moisture and pollutants. The middle layer filters airborne pollutants such as dust. The inner layer allows the cover to breathe helping keep your cover dry. Block-It 380 Series fabric is Kimberly-Clark’s newest film barrier fabric, offering great performance at a competitive price. At 3.2 ounces per square yard, it’s about half the weight of the popular high-performance NOAH® fabric. The three-layer construction uses inner and outer layers of spun-bond, sandwiching a middle layer protective film barrier. The film barrier has microscopic holes, smaller than droplets of water (and most dust particles), to stop moisture but still allow any moisture vapor or heat to easily escape from under the cover.
NOAH/400 Series – NOAH® barrier fabric actually resists moisture, yet it breathes to allow any trapped moisture, seam seepage or condensation to easily evaporate. The unique construction process (patent pending) results in a cover with maximum all-weather protection… highly water resistant, dust resistant, UV resistant and breathable to help make sure moisture and/or heat don’t stay under the cover. Made in the U.S. by Kimberly-Clark, the fabric weighs only 4.75 oz./sq. yd., so it’s easy to handle and fold. High-tech, bonded 4-layer composite uses bi-component side-by-side technology for twin spun-bond outer layers, a film barrier, and a soft bi-component spun-bond inner layer.Two outer layers of bi-component spun-bond, utilizing side-by-side spinning technology. Each individual fiber is a balance of polypropylene and polyethylene that delivers both strength and softness. The light gray color does not attract heat and the dual layers are treated with UV inhibitors for extended outdoor use.
The barrier layer is breathable film, a proprietary stretch-film technology developed exclusively for Kimberly-Clark. The film is stretched and then subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust, yet large enough to allow moisture vapor and heat to escape. This helps reduce the bulk of the non-woven fabric, while providing an almost solid barrier against the elements.
A single, heavier layer of bi-component spun-bond, utilizing side-by-side spinning technology. This heavier, single layer (as compared to a single outer layer) provides the soft touch necessary for today’s water-based paint finishes.
Note: We can custom tailor your new Hummer Cover to fit over your roof rack, brush guard, tire carrier, etc. at a small additional charge. When placing your order please describe the year, model and any additional custom work such as a roof rack, in the comments section of your shopping cart.